常用链接

ENG
宝马娱乐app下载
【学术活动】第十届NPU-UTC中法“虚拟样机设计与制造技术”学术研讨会
2017-04-17 15:36 理学院 国际合作处  审核人:   (点击: )

第十届NPU-UTC中法虚拟样机设计与制造技术学术研讨会

时  间:2017年4月18日;

地  点:正禾宾馆东三会议室

联系人:张卫红  肖曼玉 电话15229313508

理学院

一、研讨会背景:

 NPU-UTC中法“虚拟样机设计与制造技术”学术研讨会至双方2004年签订协议以来,每年双边各组织研讨一次,中方负责人为我校宝马娱乐app下载机电学院张卫红教授,法方负责人为法国贡比涅技术大学Roberval实验室副主任、高级工程师Piotr Breitkopf。

二、研讨会目的:

 此次双边研讨会的目的旨对双边交流最新科研成果,共同解决科研中遇到的问题,寻求更多更广泛的合作研究内容,以及进一步探讨双边联合培养研究生等事宜。通过此次会议进一步稳定和加强双方实验室的科研合作,扩大我团队在结构力学与优化的国际影响力,也为我国的相关优化专业带来新的研究动态。

三、受邀法国专家简介:

 Piotr Breitkopf is the head of the Multidisciplinary Design Optimization team at Université de Technologie de Compiègne (UTC), France. His research fields involve: computational mechanics, reduced order modeling, design optimization and high performance computing. He has obtained his PhD from Polish Academy of Sciences in 1988, and habilitation (HDR) from UTC in 1998. Since 2010 he is Deputy Director of Roberval Laboratory, a joint CNRS-UTC research unit. He is member of the steering committee of Labex MS2T. In 2014 he was nominated Oversea Expert of the Center for Foreign Talents Introduction and Academic Exchange of Mechanical Behavior of Advanced Structures and Materials at NPU. Together with Professor Zhang Weihong he presides the joint French-Chinese research group "Virtual Prototyping and Design". He serves at various editorial boards, scientific councils and scientific associations. He has authored and co-authored more than 200 peer reviewed journal papers, book chapters and referenced conference papers.

 Catherine KNOPF-LENOIR is senior CNRS research engineer at the Roberval Laboratory of Mechanics at the University of Technology of Compiegne (France). After a PHD in the field of optimization and identification of material parameters, she participated in the development of one of the first French finite element softwares ? Mosaic ?. Her research work focused on several aspects of optimization in Mechanics: use of continuous gradient methods for sensitivity analysis, efficient approaches for shape and processes optimization and development of simplified models for estimating the variability of the objective or constraint functions with respect to the variability of design variables to get robust solutions. She is member of the Computational Mechanics Association (CSMA) and of the board of the UNIT Foundation (Numerical University in Engineering and Technology), which associates 70 french universities and engineering schools to promote the use and the development of free online courses.

 PierreFEISSEL is associate professor at Université de Technologie de Compiègne (UTC), France and is performing his research at laboratoire Roberval, a joint CNRS-UTC research unit dedicated to mechanical engineering. His research fields involve: computational mechanics, inverse approaches, uncertainty management and digital image correlation data exploitation. His work aims at developing numerical tools to take advantage of experiments and data. Graduated from ?cole Polytechnique (France), he has obtained his PhD from ?cole Normale Supérieure de Cachan in 2003, and habilitation (HDR) from UTC in 2015. He is in (co)-charge of the research axis on the management of uncertainties at both laboratoire Roberval and Labex MS2T. He has authored and co-authored more than 70 peer reviewed journal papers, book chapters and referenced conference papers.

四、研讨会会议议程:

18 April, 2017(正禾宾馆东三会议室)

Opening Ceremony

开幕式

8:30-8:45

Welcome speech and General introduction

l Prof.Weihong ZHANG NPU

Keynote Presentations 主题报告

8:45-9:15

 

 

 

9:15-9:45

Chairman: Prof. Weihong ZHANG

l Prof.Piotr BREITKOPF UTC

Artificial intelligence in computational mechanics : machine learning approach

l Prof.Jihong ZHU NPU

9:45-10:00 Photo and Coffee/Tea break

Technical Presentations

 

 

10:00-10:30

 

 

 

 

10:30-11:00

 

 

 

 

11:00-11:30

 

 

 

 

11:00-12:00

Chairman:Prof.PiotrBREITKOPF

l Ass. Prof. Qi XIA HUST

Level set based multiple-type boundary method and its application in structural topology optimization

l Ass. Prof.Gao TONG NPU

Topology optimization of continuous structures under the variance constraint of reaction forces

l PhD Ying ZHOU NPU

A comprehensive study of feature definitions with solids and voids for topology optimization

l Ass. Prof. Manyu XIAO NPU

Categorical optimization using a custom-built continuous approach

12:00-14:00 午餐/lunch

Technical Presentations

 

 

14:00-14:30

 

 

 

 

14:30-15:00

 

 

15:00-15:30

 

 

 

15:30-16:00

Chairman:Ass. Prof. Pierre FEISSEL

l Prof.Yingjie XU NPU

Optimization of injection molding process parameters to improve the mechanical performance of impacted polycarbonate product

l Prof.Catherine VAYSSADE UTC

Characterization of arterial wall mechanical properties by a non-invasive method

l PhDYinchao MA NPU

Mechanics of tapping process including the effect of feed error

l Ass. Prof.Liang XIA HUST

Towards optimal design of multiscale nonlinear structures and reduced-order modeling approaches

16:00-16:15 Coffee/Tea break 咖啡、茶歇

Technical Presentations

 

 

16:15-16:45

 

 

 

 

16:45-17:15

 

 

17:15-17:45

Chairman: Prof.Jihong ZHU

l Ass. Prof.Pierre FEISSEL UTC

The M-CRE approach: an identification framework dealing with the reliability of information

l Post-docYun YANG NPU

Research on dynamics of milling thin-walled structures

l SeniorEngineer Linge XING 623 Institute

Optimization design on the stability of hat-stiffened composition panel

关闭窗口
XML 地图 | Sitemap 地图